top of page

PRO WEATHER STATION LOGGER

The ProWeatherStation™ is a high-performance wireless data logging weather station with advanced sensor technology resulting in good accuracy at a low cost. It provides instantaneous and historical data on Inside and Outside Temperature and Humidity, Wind Speed (average and gust), Wind Direction, Solar Intensity, and UV Index, Barometric Pressure, and Rainfall. The backlit base station logs 4080 data points with adjustable sample interval. There is a memory meter on the display that shows when the memory is getting full so the data can be downloaded and archived to a computer thru WiFi and the included WeatherSmart WiFi software. The base station also allows automatic upload of data to Weather Underground and Weather Cloud via WiFi with no PC necessary.

BREEZEPRO HORIZONTAL WIND TURBINE

The BreezePro is lightweight at less than 10.5kg and is designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die-cast aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance, and fatigue resistance. The turbines are available in a single model that is compatible with 12V and 24V battery systems. The controller autoselects the charging voltage based on the battery voltage. The turbine also includes an integrated charge controller with integrated dump load resistor. Using the dump load helps to prevent premature breaking in high winds. This helps optimize the power available for charging the batteries.

SOLAR PANELS

Such Solar Panels are specifically designed for Off/On-Grid Applications. We have both options Mono and Poly panels according to power rating requirement. High Efficiency with high transparency low iron tempered glass cover. Rugged extruded anodized aluminum frame. Sealed for protection from harsh environments. Outstanding Low Light Performance. Solar cells laminated with TPT/EVA bi-layer for long life. 25-year solar cell output warranty.The TPSHP series solar panels are high-efficiency designs with excellent low light performance. The multi-crystalline silicon solar cells are laminated with a TPT (Tedlar/Polyester/Tedlar) and EVA (Ethylene Vinyl Acetate) bi-layer for high reliability and long life. The cell array is sealed in a heavy-duty extruded aluminum frame with a high transparency low iron tempered glass cover to protect the solar cells from harsh environments; hail, wind, snow, and ice.

(TPDIN-MONITOR-WEB2) TPDIN® REMOTE MONITOR/CONTROL

The PowerSens™ Web-Based Remote Monitor and Control System is a versatile tool which enables the equipment designer and installer to remotely monitor their equipment and site. The unit can be accessed via the network (web and SNMP) to remotely monitor up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using 4 onboard relays. 

 

The system has built-in surge protection to prevent damage from electrical surges. Onboard data-logging and graphing capabilities allow the user to see history of the various parameters being measured. The graphical interface allows the user to control relays via a single mouse click and monitor all the measurement parameters real-time via any web browser. The web interface allows access and control via desktops, laptops, tablets and smartphones. The Tycon APP for IOS and Android facilitates remote access. 

 

The system allows control of the relays based on Voltage, Current, Temperature, Time or Ping Watchdog. This provides almost unlimited flexibility. The relays have a special one-click cycle feature with programmable cycle times which can be used to turn a device off and then back on after the predetermined time with a single button click. This is useful for rebooting a device like a PoE Switch by power cycling it, thereby rebooting all devices attached to the switch. Relay CH1 and CH2 are Normally Closed type, Relay CH3 and CH4 are Normally Open type. 

MPPT BATTERY CHARGING CONTROLLER

The Tycon Solar™ TP-SC48-60-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers. The 9ft battery temperature probe cable is included. The controllers are auto-ranging to accommodate 12V, 24V, 36V and 48V battery systems. There is a separate battery voltage input so that the controller can get very accurate readings of battery voltage. This removes voltage fluctuations seen because of large currents going through the battery cables.

​

 

They are designed to charge Flooded, AGM, GEL or Lithium batteries. They also have a USER setting for customizable battery charge settings. They have an integral LCD display that shows Battery Voltage, Battery Capacity, Charging Capacity, Battery Temperature, Load Current and Solar Current. 

​

There is an RS232 interface to connect to the Tycon #TP-SC-BT1 Bluetooth adapter (not included). Using this configuration and the available Android or IOS mobile app, the solar controller can be monitored and controlled from a distance. There is also an RS485 port which allows sync of multiple controllers connected in parallel. A 36in RS485 interface cable is included. 

They have multiple load operating modes which can be set through the buttons on the controller. 

UPS-PRO Backup Power System

The UPSPro™ series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable using Power Over Ethernet (PoE) using a high power PoE Supply/Inserter (included). Inside the system has a RJ45 female connector as DATA/PoE input and an RJ45 Male connector as a DATA/PoE output which gets connected to the customers POE device.The integrated controllers are Solar Ready and can be used with an external solar panel up to 85W in addition to grid power supplied via PoE. 

Customer electronics operate from battery power so they are isolated from damaging power line surges. The batteries are continuously charged via the POE input and/or solar power.

Features include a battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc.

bottom of page